DBPapers
DOI: 10.5593/sgem2017/41/S18.037

USE OF THE WATER WITHIN THE WATERJET TECHNOLOGY

M. Karkova, J. Majernik, J. Kmec, K. Pruskova
Tuesday 12 September 2017 by Libadmin2017

References: 17th International Multidisciplinary Scientific GeoConference SGEM 2017, www.sgem.org, SGEM2017 Conference Proceedings, ISBN 978-619-7408-06-5 / ISSN 1314-2704, 29 June - 5 July, 2017, Vol. 17, Issue 41, 285-292 pp, DOI: 10.5593/sgem2017/41/S18.037

ABSTRACT

Water jet technology is friendly and belongs to green technology. Water jet technology is divided depending on whether the water is used only water or a mixture of an abrasive and water to clear water jet and abrasive water jet technology. It is possible to divide as the paper material to the steel. This progressive technology is applied in various sectors of industry. During the cutting operations creates the waste in the forms as used abrasive material, polluted water, sludge, used material and other rest material from the semi products. This contribution focuses on one type of waste - water. Water is an essential parameter in the process of water jet cutting machine. In the contribution is discussed several possibilities of recycling facilities, not only based on filtering. There were tested the water samples, taken from the process before and after the process. The composition of the water before cutting and after cutting operation were discussed and were compared the quality of water after recycling.

Keywords: water jet, machine, filter, water

Home | Contact | Site Map | Site statistics | Visitors : 1 / 353063

Follow site activity en  Follow site activity RECYCLING  Follow site activity Papers SGEM2017   ?

CrossRef Member    Indexed in ISI Web Of Knowledge   Indexed in ISI Web Of Knowledge
   

© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.

Creative Commons License