NEW SGEM Scientific Online eLibrary
After a long time work, our pride is the absolutely new SGEM Online eLibrary, available here. The Library is created according the rules of the International databases, with a whole needed information and ability to export the article in BIB format. Try and spread your experience with us.
Till we complete the new library with papers from all the years, you can use this link /Full Old Library/, if papers that you need are not visible yet here.

THERMAL ANALYSIS OF SOLAR CELL USING IN BIPV

Badea, G.; Gagea-Manitiu, V.; Gagea, A.; Badita, A.; Dumitrescu, M.
Abstract:
The performance of solar modules is fundamental during the conversion process in electrical energy, depending on the temperature of the solar cell. The photovoltaic power and efficiency decrease with temperature rise, Tc. In this paper are found useful aspects regarding the increase of the temperature of solar cells correlated with commercial photovoltaic panels, based on thermal monocrystalline silicon. Correlation of all parameters in terms of materials used by the photovoltaic industry, as well as weather conditions are difficult as long as they have an impact on the operation of a photovoltaic module. We have followed a numerical thermal model in accordance with the heat transfer exchanges trough convection and radiation of a solar cell corresponding to a photovoltaic module that can determine heat transfer coefficients and cell layer resistances, for the numerical determination of the temperature TSi and Tc, behind a module with environmental conditions and the configuration of a solar cell. By following these aspects, they also conclude that photovoltaic modules integrated in the building envelope, if there is an additional layer of air corresponding to Ta, can be transformed into an additional layer of protection by improving the thermal attributes of a building, and at the same time reducing the temperature Tc, increasing the performance of the photovoltaic modules, concluding that building integrated photovoltaic systems BIPV play an important role in the energy performance of buildings. We have to keep in mind that the distribution of photovoltaic energy potential, the effect of irradiation and ambient temperatures on a photovoltaic system performance varies according to geographic position and implicitly depending on climatic zones, at the same time these parameters applied in the equations depend on the operating temperature.
SGEM Research areas:
Year:
2018
Type of Publication:
In Proceedings
Keywords:
photovoltaic energy; solar cell temperature; photovoltaic module; energy efficiency; thermal model.
Volume:
18
SGEM Book title:
18th International Multidisciplinary Scientific GeoConference SGEM2018
Book number:
6.4
SGEM Series:
International Multidisciplinary Scientific GeoConference-SGEM
Pages:
579-586
Publisher address:
51 Alexander Malinov blvd, Sofia, 1712, Bulgaria
SGEM supporters:
Bulgarian Acad Sci; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci & Arts; Slovak Acad Sci; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; World Acad Sci; European Acad Sci, Arts & Letters; Ac
Period:
3 – 6 December, 2018
ISBN:
978-619-7408-71-3
ISSN:
1314-2704
Conference:
18th International Multidisciplinary Scientific GeoConference SGEM2018, 3 – 6 December, 2018
DOI:
10.5593/sgem2018V/6.4/S09.072
Hits: 728