NEW SGEM Scientific Online eLibrary
After a long time work, our pride is the absolutely new SGEM Online eLibrary, available here. The Library is created according the rules of the International databases, with a whole needed information and ability to export the article in BIB format. Try and spread your experience with us.
Till we complete the new library with papers from all the years, you can use this link /Full Old Library/, if papers that you need are not visible yet here.

USE OF INDUSTRIAL WASTE IN THE PRODUCTION OF FOAM CONCRETE BASED ON SLAG PORTLAND CEMENT

Samchenko, S.; Kozlova, I.; Zemskova, O.
Abstract:
In the production of metallurgical products, large amounts of waste are generated, which occupy significant areas and pollute the air, water and soil with toxic compounds. However, such wastes contain many valuable elements that can improve the operational properties of construction products, including lightweight cellular concrete, which will solve several problems at once: to free land, to improve the ecological situation in the area, to improve the quality of construction industry products. It is offered to use metallurgical slags in the form of suspensions stabilized by the plasticizer to improve the initial building-technical properties of astringent compositions. The studies of the properties of slag portland cement (SPT) with the addition of a stabilized suspension of ultradisperse blast-furnace granulated slag (UdGS) are given in this article. It is shown that the strength of experimental compression samples increased by 48% in the first day of hardening from 13.4 to 19.8 MPa, at the age of brand - by 34% from 52.2 to 70.0 MPa in comparison with the control sample (SPT + plasticizer), while porosity at the age of a brand decreased by 36%. When using the SPT and stabilized UdGS suspensions, non-autoclave foam concrete was obtained. The use of stabilized with plasticizer suspensions UdGS allowed to increase the strength class of foam concrete for compression from B2 (M25) to B2,5 (M35), reduce the coefficient of thermal conductivity from 0.16 to 0.14 W / (m ° C) and achieve shrinkage reduction when drying from 5 to 3 mm / m with an average density in the dry state of 500 kg / m3 compared to the control foam concrete.
SGEM Research areas:
Year:
2018
Type of Publication:
In Proceedings
Keywords:
ultradisperse blast-furnace granulated slag; slag Portland cement; stabilization; plasticizer
Volume:
18
SGEM Book title:
18th International Multidisciplinary Scientific GeoConference SGEM 2018
Book number:
6.3
SGEM Series:
International Multidisciplinary Scientific GeoConference-SGEM
Pages:
437-444
Publisher address:
51 Alexander Malinov blvd, Sofia, 1712, Bulgaria
SGEM supporters:
Bulgarian Acad Sci; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci & Arts; Slovak Acad Sci; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; World Acad Sci; European Acad Sci, Arts & Letters; Ac
Period:
02-08 July, 2018
ISBN:
978-619-7408-52-2
ISSN:
1314-2704
Conference:
18th International Multidisciplinary Scientific GeoConference SGEM 2018, 02-08 July, 2018
DOI:
10.5593/sgem2018/6.3/S26.057
Hits: 868